月夜（moonlit）：プレオーダーから2022年変更履歴更


Moonlit: Changes from pre-order to 2022

Moonlit: Changes from pre-order to 2022 revision history


• Version 1. Test version 2019/11

  1. Cap → Neck axis M12×0.8 3 pieces
  2. Neck axis → Body M10×0.75
  3. Neck axis length 25mm

• Version 2. 2020/02

  1. Cap → Neck axis M12×0.75 1 piece
  2. Cap length 32 → 35mm
• Version 3. 2020/07
  1. Neck axis length changed to 29mm
  2. Neck axis - Body changed to M10×1.0 (custom order ・ pre-order)
• Version 4. 2020/10
  1. A straight fitting part is provided on the neck axis to prevent wobbling at the end of the shaft.
  2. Nib changed from JOWO to Bock
  3. A straight part is provided on the cap section to prevent wobbling at the fitting.
  4. End of the shaft diameter changed from 12 → 11.8mm

• Version 5. 2021/10

  1. Material changed to Carbon Black Ebonite
  2. Cap thread changed to M11×0.8 3 pieces
  3. Cap changed from shaft head to taper
  4. Revised length balance, cap to 32mm, neck axis to 30mm, body to 89mm
• Version 6. 2022/1
  1. Unified the shape of the shaft head and shaft end for each individual
  2. Engraved the brand logo
  3. Added imitation ivory to the shaft material

    • Version 7. Scheduled for 2023

    • Specifications changed for the addition of lacquer and raden use
    1. Cap thread changed to M11×0.75 1 piece
    2. Body - Section joint screw changed from M10×1.0 to M10×0.75


    It does not mean that there will be no further improvements. However, they are expected to be minor.

    Back to blog